組裝式鋼筋加工棚和傳統鋼管防護棚的比照：鋼筋加工棚符合出產標準化要求，定型組裝和裝置，配色，結構，可滿意標準化要求。從際裝置和運用，現已達到了感知的質量，而且能夠徹底顯示標準化而且好地作業。

Comparison between prefabricated steel bar processing shed and traditional steel pipe protective shed: The steel bar processing shed meets the safety production standardization requirements, with standardized assembly and installation, color matching, and structural safety, and can meet the standardization requirements. From the perspective of equipment and application, it has now achieved perceptual quality and can fully display standardization and operate well.

標準化：防護棚的標準化能夠從工廠、產品定型化、標準化等方面得到充分體現。既能滿意防護的基本要求，又能體現運用便利、布局規整、外觀漂亮的特色。

Standardization: The standardization of protective sheds can be fully reflected in aspects such as factory, product standardization, and standardization. It can not only meet the basic requirements of safety protection, but also reflect the characteristics of convenient use, neat layout, and beautiful appearance.

1.高周轉率：分解后易于卸載和堆積

1. High turnover rate: easy to unload and stack after decomposition

一次輸入，可屢次運用，拆裝后的結構件簡略易操作，便于裝卸、運送、堆積；裝置簡略便利。

One input, can be used multiple times, and the disassembled structural components are simple and easy to operate, making them easy to load, unload, transport, and stack; The device is simple and convenient.

2。減少現場出產和環境污染

2. Reduce on-site production and environmental pollution

由于運用工廠出產，避免了在施工現場進行切開，焊接和焊接的出產過程。該站點只能在裝置后投入運用。這減少了出產造成的環境污染，反映了建筑業的現代化。綠色建筑開展的要求。高周轉率避免了資料浪費，凸顯了減排的特色。

Due to the use of factory production, the production process of cutting, welding, and welding at the construction site is avoided. This site can only be put into use after installation. This reduces environmental pollution caused by production and reflects the modernization of the construction industry. The requirements for the development of green buildings. The high turnover rate avoids data waste and highlights the characteristics of energy conservation and emission reduction.

三。與傳統鋼管防護棚的比照

III. Comparison with traditional steel pipe protective sheds

高周轉率，少用鋼；強定型，構件全體剛度高，有利于防護；任何組合，布局靈敏；受外力影響較小，不易變形；有很高的系數。裝置簡略，裝置本錢低，可在許多方面下降施工本錢。

High turnover rate, using less steel; Strong shaping, high overall stiffness of components, beneficial for safety protection; Any combination, layout sensitive; Less affected by external forces and less prone to deformation; Has a high safety factor. The device is simple and has low installation costs, which can reduce construction costs in many ways.

4。低損耗、低保護本錢

4. Low loss, low protection cost

本實用新型操作保護簡略，損失率低，運送、貯存、保護便利，機動性強。

This utility model has simple operation protection, low loss rate, convenient transportation, storage, and protection, and strong mobility.

裝置運用特色

Characteristics of device application

1.組件小，重量輕：拆開和組裝少，拆裝便利，固定簡略，裝置便利。

1. Small components, light weight: less disassembly and assembly, convenient disassembly and assembly, simple fixation, and convenient installation.

2。布置靈敏，移動便利：可根據現場需要進行組裝，也可由現場塔吊運地址。

2. Sensitive layout and convenient mobility: it can be assembled according to on-site needs or transported to the address by on-site tower crane.

3.為操作提供更多的作業空間：首要的承重部件是鋼柱。柱子之間的空間很大，而且是無障礙的。棚內的物料加工具有較大的旋轉半徑，便于物料的搬運、出產和堆積。

3. Provide more workspace for operations: The primary load-bearing component is the steel column. The space between the pillars is large and unobstructed. The material processing inside the shed has a large rotation radius, which facilitates the handling, production, and stacking of materials.

本文來自：鋼筋加工棚更多的內容請點擊：http://www.gdzxzl.com我們將會為您提問的問題提供一個滿意的服務，歡迎您的來。

This article is from: Reinforcement Processing Shed. For more information, please click on: http://www.gdzxzl.com We will provide a satisfactory service for the questions you ask, and welcome you to come.